Reliability Centre was started in the year 2009 to ensure all CG products goes with high Reliability. For new products, the centre develops Reliability requirements, establish adequate reliability methodologies, and perform appropriate analysis (Reliability prediction, allocation, FMEA, RGA, RDT,
HALT, HASS, and FRACAS) and tasks to ensure the product will meet its requirements. For existing products, Reliability centre is working towards establishing optimal Reliability by performing failure analysis, Benchmarking, Process Reliability analysis and Improvement validation testing. The centre is equipped with specialized software and test facilities. Reliability centre also develop customized test setup as required for the product.

Competencies

Reliability analysis of Electrical, Electro-mechanical, Electronic and Mechanical products/systems

• Reliability modeling
• Reliability prediction/estimation
  >MTBF prediction (standard based)
  >Life data analysis (based on field failure data)

• Failure Mode Effect Analysis (FMEA)
  >Reliability Development/Growth testing
  >Benchmark test
  >HALT (Highly accelerated life testing)
  >Failure analysis
  >Design verification test

• Reliability Demonstration testing
  >ORT (Ongoing Reliability testing)
  >ALT (Accelerated life testing)

• HASS (Highly accelerated stress screening)
• Process Reliability analysis and Improvement
• Multi-state system Reliability analysis
• Reliability centered maintenance
• Safety assessment and Hazard analysis
• Common mode analysis
  
  Software
• Weibull++7 | ALTA | Lambda predict | Block sim

Bump tester	Dry heat oven
Environmental chamber	Thermal shock chamber